XWZY-1系列萬能制樣機
XWZY-1系列萬能制樣機由試樣切割部分、缺口制樣部分、啞鈴制樣部分三部分組成。試樣切割部分用于切割條形試樣、管材試樣。缺口制樣部分用于制備簡支梁、懸臂梁沖擊試驗的試樣樣條缺口。啞鈴制樣部分用于制備各種非金屬材料拉伸試驗用標準啞鈴試樣或非標準試樣。三種功能集于一身,便于實現制樣全過程。制樣主動力分別由電機驅動,帶動銑刀及鋸片旋轉切割試樣。各個方向進給用導軌進行導向,移動平穩。夾具方便靈活,適用于多種試樣的制作。為防止試樣加工發熱變形,制樣過程采用水冷卻,由水泵進行水循環。該萬能制樣機結構緊湊、操作方便、進給平穩、制樣迅速準確。
為安全起見本儀器操作按扭均為急停按扭,既旋轉打開按下停止。
該機分為兩種:XWZY-1型 自然冷卻 XWZY-2型 水冷
技術參數
一、 缺口制樣部分
缺口制樣部分主要用于制備簡支梁、懸臂梁沖擊試驗的試樣樣條缺口。該機主要技術參數符合GB/T1043-1993、GB/T1843-1996、ISO179-1993、ISO180-1993等標準要求。其結構簡單,操作方便,試樣制備快速,尺寸準確,是試樣缺口制備的理想設備。
1、技術規格
額定功率:180W
額定電壓:220V
銑刀轉速:1400r/min
走刀行程:50mm
夾緊行程:60mm
橫向行程:40mm
提升行程:20mm
工作臺面尺寸:長×寬=500mm×380mm
試樣類型:1、2、3、4型
銑刀參數:
A型刀具:直徑Φ63mm,45o±30',R=0.25±0.025mm
B型刀具:直徑Φ63mm,45o±30',R=1.0±0.025mm
C2型刀具:直徑Φ60mm,厚度2.0±0.1mm,R<0.1mm
C2型刀具:直徑Φ60mm,厚度0.8±0.1mm,R<0.1mm(選購)
二、 啞鈴制樣部分
啞鈴制樣部分用于制備各種非金屬材料拉伸試驗用標準啞鈴試樣或非標準試樣。該機制備的試樣符合GB1040、GB8804.1、GB8804.2等標準。
技術規格:
電 源:AC220V±10%,600W
銑刀轉速:2820r/min
銑刀直徑:φ27mm
走刀行程:300mm
壓緊行程:25mm
工作臺面尺寸:長×寬=570mm×560mm
三、 試樣切割部分
試樣切割部分用于切割條形試樣、管材試樣。適用于各種形狀,切割快速,尺寸準確。
技術規格:
電 源:AC220V±10%,750W
鋸片轉速:4000r/min
鋸片直徑:φ250mm
鋸片厚度:3mm
鋸片切割高度:45mm
切割行程:260mm
工作臺面尺寸:長×寬=570mm×460mm
XWZY series universal system prototype
XWZY series universal system prototype a sample cutting gap, a dumbbell sample preparation, sample preparation of three parts.Specimen cutting part is used for cutting bar and tube sample.Gap part sample preparation used for preparation of simply supported beam and cantilever beam impact test article try all the gaps.Dumbbell part sample preparation was used to prepare all kinds of nonmetal materials tensile test with standard dumbbell specimen or non-standard.Three kinds of feature set in one, a sample is advantageous for the accounting process.Sample preparation serval respectively, driven by a motor drive the cutter and the saw blade rotation cutting sample.All directions feed using guide direction, moving smoothly.Fixture convenient and flexible, suitable for the production of a variety of sample.In order to prevent the hot deformation sample processing, sample preparation process adopts water cooling, the water pump for water circulation.The universal sampling machine structure is compact, easy to operate, stable feeding, rapid and accurate sample preparation.
To be on the safe side the instrument button are abrupt stop button operation, both open press stop rotating.
The machine is divided into two kinds: XWZY - natural cooling XWZY type 1-2 type water cooling
Technical parameters
One, the gap part sample preparation
Gap part sample preparation is mainly used for the preparation of simply supported beam and cantilever beam impact test article try all the gaps.Main technical parameters of the machine in accordance with GB/T1043-1993, GB /, ISO179 T1843-1996-1996, ISO180-1993 standard requirement.Its simple structure, convenient operation, fast sample preparation, precise size, it is an ideal equipment of sample preparation gap.
1, technical specifications,
Rated power: 180 w
Rated voltage: 220 v
The mill speed: 1400 r/min
Feeding schedule: 50 mm
Clamping stroke: 60 mm
Horizontal stroke: 40 mm
The ascension journey: 20 mm
The worktable size: length x width = 500 mm x 380 mm
Sample types: type 1, 2, 3, 4
Cutter parameters:
Type A tool: Φ diameter of 63 mm, 45 DHS plus or minus 30 ', R = 0.25 + / - 0.025 mm
Type B tool: Φ diameter of 63 mm, 45 DHS plus or minus 30 ', R = 1.0 + / - 0.025 mm
C2 type cutter: Φ 60 mm diameter, the thickness of 2.0 + / - 0.1 mm, R < 0.1 mm
C2 type cutter: Φ 60 mm diameter, the thickness of 0.8 + / - 0.1 mm, R < 0.1 mm (to buy)
Second, the dumbbell sample preparation section
Dumbbell part sample preparation was used to prepare all kinds of nonmetal materials tensile test with standard dumbbell specimen or non-standard.The machine preparation of sample conforms to GB1040, GB8804.1, GB8804.2 standard, etc.
Technical specifications:
Power source: AC220V plus or minus 10%, 600 w
The mill speed: 2820 r/min
Milling cutter diameter: phi 27 mm
Feeding schedule: 300 mm
Compression stroke: 25 mm
The worktable size: length x width = 570 mm x 560 mm
Part three, sample cutting
Specimen cutting part is used for cutting bar and tube sample.Suitable for all kinds of shapes, fast cutting, size accurate.
Technical specifications:
Power source: AC220V plus or minus 10%, 750 w
The saw blade rotation speed: 4000 r/min
Saw blade diameter: 250 mm
Saw blade thickness: 3 mm
Saw blade cutting height: 45 mm
Cutting stroke: 260 mm
The worktable size: length x width = 570 mm x 460 mm